Schedule: Monday - Friday: 12:00PM - 10:00PM
The electrical panel is the distribution point for every circuit in the building. When it is undersized, obsolete, or a known-defective brand, everything downstream is affected: breakers that nuisance-trip, no room to add circuits, and in some cases a genuine fire risk.
Panel replacement means removing the existing panel and installing a new one sized for how the building is actually used, with new breakers, correct grounding and bonding, and a labeled circuit directory. In the Orlando area this is permitted work and it has to be inspected. 407 Electrical pulls the permit and handles the inspection as part of the job.
Panels get replaced for one of three reasons: age, capacity, or a known defect in the equipment itself.
Any one of these is reason enough to have the panel looked at during a free estimate.
Fuse panels were not designed for the loads a modern home carries. They also invite the dangerous habit of replacing a blown fuse with a larger one.
FPE (Federal Pacific Electric), Sylvania/Zinsco and Challenger panels have known failure modes. Some can fail to trip under fault conditions, which is exactly what a breaker exists to prevent.
If every slot is full, or already doubled up, adding an EV charger, a new air conditioning system or a workshop circuit is not possible without a larger panel.
When trips are not isolated to one circuit, the panel or the service capacity is often the limiting factor.
Corrosion and heat damage inside a panel are not repairable conditions. The panel needs to be replaced.
A humming panel can indicate a loose bus connection or a failing main breaker.
Home inspectors and insurance underwriters flag obsolete and recalled panels routinely.
Scope is confirmed on your free estimate. A typical residential panel replacement involves:
We look at what the building runs today and what you plan to add, then size the new panel accordingly.
Panel replacement requires a permit in the Orlando area. We pull it and coordinate the inspection.
The utility disconnect is arranged so the changeover can be done safely.
New enclosure, new breakers, and connections terminated and torqued to specification.
Grounding and bonding are brought up to current National Electrical Code requirements.
Every breaker is identified, so you are not guessing during an outage.
We meet the inspector and close the permit out.
A panel that may not trip under a fault is the most dangerous piece of equipment in a building. Replacement removes that risk.
A properly sized panel leaves room for an EV charger, a heat pump, pool equipment or a workshop without overloading the service.
New panels are installed to current National Electrical Code requirements, with the permit and inspection on record.
Obsolete and recalled panels come up during home inspections and insurance underwriting. Replacing one removes a known objection.
Modern breakers on a correctly loaded panel end the weekly reset routine.
407 Electrical is a certified electrical contractor, license #EC13011955, with over 20 years of experience in Central Florida. Panel work is permitted work, and we handle the permit and the inspection so you are not managing that yourself.
We make it easy for you to receive electrical services.
Send us a short description and photos of the situation, or set up a video call. We look at it with you and give you a quote.
Once the quote works for you, approve it and we move forward. No work starts before you have agreed on the price.
We send payment information for the deposit. As soon as it is received we move on to scheduling.
We work Monday to Friday, 12:00 PM to 10:00 PM. Pick a time from our availability and we will be there to do the work.
Several panel brands have been recalled or are widely recognized as unsafe. The ones we see most often in Central Florida are FPE (Federal Pacific Electric), Sylvania/Zinsco and Challenger. The concern with these panels is not cosmetic. Under certain fault conditions the breakers may not trip, which leaves the circuit unprotected.
If you have one of these panels, it is worth having it looked at even if nothing has gone wrong yet. Send a photo of the panel label and the interior with your free estimate request and we can tell you what you are dealing with.
Level 2 EV charger installation for homes and businesses, including the dedicated 240-volt circuit, panel capacity check and permitting.
Wiring that connects a standby or portable generator to your electrical system safely, using a transfer switch or interlock instead of a backfeed.
A licensed electrician's assessment of your panel, wiring, devices and protection, with a clear report of what is safe and what needs attention.
We provide electrical panel replacement across our Central Florida service area:
Answers to what customers ask us most about electrical panel replacement.
Yes. In the Orlando area, panel replacement requires a permit and an inspection. We pull the permit and handle the inspection as part of the job.
Most residential panel changes are completed in a day. The overall timeline depends on how quickly the permit is issued and when the utility disconnect can be coordinated.
Yes. Power is off while the panel is changed out. We will tell you what to expect for your specific job before the appointment.
It depends on what the building runs and what you plan to add. If you are adding an EV charger, pool equipment or a new air conditioning system, capacity usually drives the decision. We evaluate the load as part of the estimate.
These panels have known failure modes in which breakers may not trip during a fault. They are commonly recommended for replacement, and inspectors and insurers flag them regularly.
Estimates are free. Send photos of the panel label, the interior and the surrounding area, or set up a short video call, and we will quote it.
