Schedule: Monday - Friday: 12:00PM - 10:00PM
Charging an electric vehicle from a standard household outlet works, slowly. A Level 2 charger runs on a dedicated 240-volt circuit and turns overnight charging into something that actually keeps up with daily driving.
The installation is mostly about the circuit, not the charger. It needs a dedicated 240-volt circuit sized for the unit, a run from the panel to wherever the car parks, and enough spare capacity in the panel to carry the load alongside everything else the building already runs.
407 Electrical installs EV chargers at homes and at businesses in the Orlando area. We check panel capacity first, because that is the item most likely to change the scope of the job.
These are the questions that decide what the installation looks like and what it costs.
A Level 2 charger is a substantial continuous load. If the service is already close to its limit, capacity has to be addressed before the charger goes in.
A 240-volt circuit needs two adjacent slots. Full panels and panels already using tandem breakers often do not have them.
Distance drives conductor size and the routing. A detached garage or a driveway on the far side of the house is a different job than a garage wall next to the panel.
Some chargers hardwire, some plug into a 240-volt receptacle. The choice affects the circuit, the breaker and, in some cases, the permit.
Outdoor installations need weather-rated equipment and enclosures that hold up to Central Florida sun and rain.
More than one charging position changes the load calculation significantly and often requires a dedicated feed.
Scope is confirmed on your free estimate. A typical residential installation involves:
We confirm the service has capacity for the charger alongside your existing loads, and that there is space for the breaker.
A new circuit sized for the charger, with the correct breaker. EV chargers are not shared with other loads.
Conductors routed through walls, attic or conduit to the charging location, with outdoor runs in weather-rated materials.
The unit mounted at a workable height and position, hardwired or fitted with a 240-volt receptacle as required.
New circuits require a permit in the Orlando area. We pull it and coordinate the inspection.
We verify the charger comes up and delivers to the car before we finish.
A dedicated 240-volt circuit recovers a normal day's driving overnight instead of over a weekend.
EV charging is a heavy continuous load. Extension cords and shared circuits are exactly the wrong approach to it.
Permitted and inspected work that meets National Electrical Code requirements, on record for resale and insurance.
Sorting the panel out during the charger installation leaves room for a second vehicle or other future loads.
Charging at home on your own schedule instead of planning trips around public chargers.
407 Electrical is a certified electrical contractor with over 20 years of experience in Central Florida, license #EC13011955. EV charger installation is straightforward work when panel capacity is checked properly at the start, which is where we begin.
We make it easy for you to receive electrical services.
Send us a short description and photos of the situation, or set up a video call. We look at it with you and give you a quote.
Once the quote works for you, approve it and we move forward. No work starts before you have agreed on the price.
We send payment information for the deposit. As soon as it is received we move on to scheduling.
We work Monday to Friday, 12:00 PM to 10:00 PM. Pick a time from our availability and we will be there to do the work.
This comes up regularly, particularly in older homes and in houses that already run a pool pump and multiple air conditioning systems. If the service does not have the capacity, or the panel has no room for the breaker, the panel is addressed first and the charger circuit goes in afterward.
It is not the answer anyone wants, but it is far better than finding out after the charger is on the wall. If you send a photo of your panel with the door open when you request your estimate, we can usually tell you right away whether panel replacement is going to be part of the project.
Replacement of outdated, undersized or recalled electrical panels for Orlando-area homes and businesses, permit and inspection included.
A licensed electrician's assessment of your panel, wiring, devices and protection, with a clear report of what is safe and what needs attention.
Installation and wiring of smart switches, dimmers, thermostats and connected controls, handled properly at the device and at the circuit.
We provide ev charger installation across our Central Florida service area:
Answers to what customers ask us most about ev charger installation.
Yes. A Level 2 charger requires a dedicated 240-volt circuit sized for the unit. It is not shared with other outlets or appliances.
Installing a new circuit requires a permit in the Orlando area. We pull the permit and coordinate the inspection as part of the job.
Often yes, but not always. It depends on your service size and what the house already runs. We evaluate panel capacity as part of the free estimate, before any work is scheduled.
Yes. The distance from the panel and the route affect conductor size and cost, so tell us where the car parks when you request your estimate.
Yes. Send us the make and model with your estimate request and we will size the circuit for it.
Yes. We do commercial installations as well as residential. Multiple charging positions change the load calculation, so let us know how many you are planning.
